PTFE Coated Products

PTFE Coated Products



PTFE Coated Products

Download Catalogue

PTFE (Polytetrafluoro Ethylene) coatings are two-coat (primer/topcoat) systems that has a successful application as non-stick coatings. PTFE non-stick coated products has highest operating temperature among any fluoropolymer, very low coefficient of friction, excellent abrasion resistance, and great chemical resistance. PTFE coatings can withstand a maximum of 600°F. The surface has a high lubricity property. PTFE coating is typically applied to a thickness of 1-2 mils.


Benefits of PTFE Coating:


  1. PTFE coating is an ideal non-stick surface that makes your product a more convenient choice. PTFE coating is very effective and prevents frustrating sticking which is common in cooking products. Some consumers looks specifically for a non-stick PTFE coating, which makes your product even more appealing.
  2. PTFE coating is heat and water resistant. The surface is easy to clean and water does not cause the industrial coating to become saturated. In most cases, the surface can be quickly wiped clean or even rinsed to remove any remaining debris in seconds. PTFE coating can also withstand temperatures of up to 600 °F (or 260 °C). This makes PTFE Coating great choice for a number of heat intensive applications.
  3. Chemical resistance is a concern for some products. PTFE coatings are not affected by most chemicals found in its environment. If you are concerned about chemical contact, PTFE is an excellent choice.
  4. The right coating can help your product exceed customer expectations, whether you sell directly to consumers or create parts and equipment for businesses and organizations. The most important step is choosing a product that will enhance your parts at an economical price. You can enhance the properties and capabilities of your parts and products with the help of a quality PTFE coating.


PTFE coating is available in aqueous based forms. PTFE coatings can provide the solution to many engineering questions particularly those relating to non-stick (release), low friction, chemical resistance and wear resistance, there are many other solutions that can be resolved by the application of PTFE coatings.



Properties of PTFE



Density (g/cm³)


Water Absorption, 24 hrs (%)

< 0.01


Tensile Strength (psi)


Tensile Elongation at Break (%)


Flexural Strength (psi)

No break

Folding Endurance (cycles)

> 106

Flexural Modulus (psi)


Hardness, Shore D


IZOD Notched Impact (ft-lb/in)



Melting Temp (°F / °C)

635 / 335

Max Operating Temp (°F / °C)

500 / 260

Flammability Rating



Dielectric Constant at 1 MHz


Dissipation Factor at 1 MHz

< 0.0002

Arc Resistance (sec)

< 300

Volume Resistivity (ohm-cm)at 50% RH

> 1018


Typical Application for PTFE Coatings


  1. Agitators
  2. Bafffles
  3. Coating Pans
  4. Centrifuges
  5. Coat Tanks
  6. Column Sections
  7. Conical Blenders
  8. Conveyers
  9. Cookers
  10. Covers
  11. Dip Tanks
  12. Dip Pipes
  13. Distillation Columns
  14. Dryers
  15. Dryer Trays
  16. Drum Filters
  17. Electrolytic Cells
  18. Extension Pieces
  19. Fans
  20. Filter Housings
  21. Fittings
  22. Feeders
  23. Flush Outlet Valves
  24. Vessels
  25. Heat Exchanger Coils
  26. Hoppers
  27. Bellows
  28. Dip Tubes
  29. Ducts
  30. Fume Hoods
  31. Gas Cylinders
  1. Piping Systems
  2. Plating Equipments
  3. Probes
  4. Impellers
  5. ISO Containers
  6. Kettles
  7. Knockout Pots
  8. Man way Covers
  9. Mist Eliminators
  10. Mixers
  11. Mixing Equipment
  12. Molds
  13. Pipe Works
  14. Pressure Filters
  15. Protector Rings
  16. Pumps
  17. Reactor Vessels
  18. Rollers
  19. Rounders
  20. Reducing Flanges
  21. Scrubber Sections
  22. Storage Tanks
  23. Thermo Wells
  24. Trays
  25. Vaccum Filters
  26. Valves
  27. Venturis
  28. Spargers
  29. Storage Vessels
  30. Tanks
  31. Blenders